The mioio development card ("myioyo") could be a clone of the yoio card ("yoyo") developed by Ytai, but a little smaller.
Have you ever thought about programming only on android to have your own mobile phone accessories? Well now you can.
The card has 38 roads / exits so that you can use them as best you can.
- 16 analog inputs that can be digital inputs / outputs.
- 20 digital inputs / outputs (14 compatible to 5V).
- 27 compatible pwm pins (5 simultaneous).
- 3 I2C ports.
- 4 serial ports.
- 3 simultaneous SPI buses.
Legend:
- A / D: pins can be used as analog inputs
- I2C: pin can be used as I²C: DAx - data pin if I²C module number x, CLx - clock pin if I²C module number x
- PPSi: pin can be used as input for remappable peripherals (input capture, UART, SPI)
- PPSo: pin can be used as output for remappable peripherals (UART, SPI, comparator output)
- 5V: pin is 5V tolerant: can be used as 5V input or 5V output in open-drain mode
- Comp: pin can be used as comparator input number as specified
- Prog: pin can be used for ICSP: use Vpp and either C1/D1, C2/D2 or C3/D3 which are clock and data, respectively
Notes:
- All the pins can be used as input / output (GPIO)
- All the pins can be used like "interruptions of change"
The following table describes the pins that are available in this release.
| MIOIO pin | A/D | I²C | PPSi | PPSo | 5V | Comp. | Prog. | PIC pin | PIC function |
|---|---|---|---|---|---|---|---|---|---|
| 3 | Y | Y | Y | 42 | RTCC/DMLN/RP2/CN53/RD8 | ||||
| 4 | DA0 | Y | Y | Y | 43 | DPLN/SDA1/RP4/GD8/CN54/RD9 | |||
| 5 | CL0 | Y | Y | Y | 44 | SCL1/RP3/GD6/CN55/RD10 | |||
| 6 | Y | Y | Y | 45 | RP12/GD7/CN56/RD11 | ||||
| 7 | Y | Y | Y | 46 | DMH/RP11/INT0/CN49/RD0 | ||||
| 8 | 3D | 47 | SOSCI/C3IND/CN1/RC13 | ||||||
| 9 | Y | 3C | 48 | SOSCO/SCLKI/T1CK/C3INC/RPI37/CN0/RC14 | |||||
| 10 | Y | Y | Y | 49 | VCPCON/RP24/GD9/VBUSCHG/CN50/RD1 | ||||
| 11 | Y | Y | Y | 50 | DPH/RP23/CN51/RD2 | ||||
| 12 | Y | Y | Y | 51 | RP22/GEN/CN52/RD3 | ||||
| 13 | Y | Y | Y | 52 | RP25/GCLK/CN13/RD4 | ||||
| 14 | Y | Y | Y | 53 | RP20/GPWR/CN14/RD5 | ||||
| 15 | 3B | 54 | C3INB/CN15/RD6 | ||||||
| 16 | 3A | 55 | C3INA/SESSEND/CN16/RD7 | ||||||
| 25 | CL2 | Y | 2 | GD12/SCL3/CN64/RE6 | |||||
| 26 | DA2 | Y | 3 | GD13/SDA3/CN65/RE7 | |||||
| 27 | Y | Y | 1D | 4 | C1IND/RP21/CN8/RG6 | ||||
| 28 | Y | Y | 1C | 5 | C1INC/RP26/CN9/RG7 | ||||
| 29 | Y | Y | 2D | 6 | C2IND/RP19/GD14/CN10/RG8 | ||||
| 30 | Y | Y | 2C | 8 | C2INC/RP27/GD15/CN11/RG9 | ||||
| 31 | Y | Y | Y | 1A | C3 | 11 | PGEC3/AN5/C1INA/VBUSON/RP18/CN7/RB5 | ||
| 32 | Y | Y | Y | 1B | D3 | 12 | PGED3/AN4/C1INB/USBOEN/RP28/CN6/RB4 | ||
| 33 | Y | 2A | 13 | AN3/C2INA/VPIO/CN5/RB3 | |||||
| 34 | Y | Y | Y | 2B | 14 | AN2/C2INB/VMIO/RP13/CN4/RB2 | |||
| 35 | Y (ref +) | Y | Y | C1 | 15 | PGEC1/AN1/VREF-/RP1/CN3/RB1 | |||
| 36 | Y (ref -) | Y | Y | D1 | 16 | PGED1/AN0/VREF+/RP0/CN2/RB0 | |||
| 37 | Y | Y | Y | C2 | 17 | PGEC2/AN6/RP6/CN24/RB6 | |||
| 38 | Y | Y | Y | D2 | 18 | PGED2/AN7/RP7/RCV/CN25/RB7 | |||
| 39 | Y | Y | Y | 21 | AN8/RP8/CN26/RB8 | ||||
| 40 | Y | Y | Y | 22 | AN9/RP9/CN27/RB9 | ||||
| 41 | Y | 23 | TMS/CVREF/AN10/CN28/RB10 | ||||||
| 42 | Y | 24 | TDO/AN11/CN29/RB11 | ||||||
| 43 | Y | 27 | TCK/AN12/CTEDG2/CN30/RB12 | ||||||
| 44 | Y | 28 | TDI/AN13/CTEDG1/CN31/RB13 | ||||||
| 45 | Y | Y | Y | 29 | AN14/CTPLS/RP14/CN32/RB14 | ||||
| 46 | Y | Y | Y | 30 | AN15/RP29/REFO/CN12/RB15 | ||||
| 47 | DA1 | Y | Y | Y | 31 | SDA2/RP10/GD4/CN17/RF4 | |||
| 48 | CL1 | Y | Y | Y | 32 | SCL2/RP17/GD5/CN18/RF5 | |||
| stat LED | Y | Y | Y | 33 | RP16/USBID/CN71/RF3 |